Material Guide articles
Sourcing checklists, DFM guidance, and process deep-dives for OEM/ODM buyers and design engineers.
All articles
Food-Grade Plastic Injection Molding: FDA 21 CFR, EU 10/2011, and Material Compliance for Food Contact Parts
A compliance guide for OEM buyers sourcing food-contact injection-molded parts: FDA 21 CFR Part 177 vs EU Regulation 10/2011, resin selection (PP, HDPE, Tritan, POM), mold design rules, and the EU PPWR PCR mandates applying from August 2026.
Bioplastics in Commercial Injection Molding: Scaling PLA, PHA, and Bio-PP from Prototype to Production
What actually changes at the injection molding machine when you switch to bioplastics—processing parameters, tooling requirements, and quality gates for PLA, PHA, and Bio-PP commercial programs.
Injection Mold Steel Selection Guide: P20, H13, S136, and NAK80 Explained
Choosing the wrong mold steel at RFQ time can cost $25,000 in mid-run cavity repairs. This guide compares P20, H13, S136, and NAK80 across hardness, shot life, resin compatibility, and cost.
Fiber-Reinforced Plastic Injection Molding: Engineering Guide to Glass-Filled Thermoplastics
Glass-filled nylon (PA66 GF30) doubles tensile strength and triples HDT compared to unfilled grades—but introduces anisotropic shrinkage, weld-line weakness, and accelerated mold wear that engineers must design around.
Liquid Silicone Rubber (LSR) Injection Molding: Process, Properties, and When to Choose It Over TPE
LSR injection molding reverses standard thermal logic: cold barrel, heated mold. Learn the process, compare LSR vs TPE vs EPDM, and discover the 4 engineering triggers that make LSR essential.
Plastic Injection Molding Material Selection Guide: ABS, PC, Nylon, PP, PEEK and How to Choose
Compare ABS, PC, PP, nylon, POM, TPE, and PEEK for injection molding: tensile strength, heat resistance, cost, and a decision framework for choosing the right engineering resin.
Sustainable Injection Molding: A Practical Guide to Recycled Resins and ESG Compliance for OEM Buyers
How OEM buyers can navigate PCR resins, bio-based plastics, and ESG supplier audits in today's injection molding market.
Have a part you need molded?
Send a drawing or describe the project — our engineers respond with a quote within 24 hours.